Home improvement services
Quick Guide Installation Videos
Experienced vinyl siding installers know that the nail should never be tight against the nailing fin. This is because the head of the nail needs about 1/16” space between the nailing fin. Carefully measure, mark your cuts, and trim the siding to fit snugly around these openings.
Choosing Your Vinyl Siding
Our certification program helps improve end results to minimize issues and callbacks. Homeowners rely on VSI Certified Installers to complete their projects to the highest industry standard. Refresh your vinyl siding installation insight with the latest best practices in our comprehensive guide.
Siding the Soffit and Fascia Area
Make sure to leave an inch gap between the siding and the flashing at all flashing locations, such as each horizontal termination. When the siding is completely installed, you will caulk the vertical gaps between Residential siding your siding and trim. Whenever possible, cut the fiber cement boards upside down to get the cleanest lines. As with all sidings that produce dust, best practices include dust masks and tools that minimize the amount of dust produced when cutting the siding.
- It’s low maintenance, affordable, and can be made to resemble other materials like wood or stone for a fraction of the cost.
- Bend the wide surface of the channel inward at this cut to make a drip-edge tab and slide the tab under the sill channel.
- This is the most common installation mistake and the most costly.
- For smooth and secure siding, inspect the surface that it will be attached to.
- Meanwhile, we prep your home for minimal heat loss during the installation process.
- This style can make a house appear taller, and homeowners use it for contemporary or farmhouse-style homes.
Step Eight: Installing the Siding
According to HomeAdvisor, the average vinyl siding installation cost is $11,136, and most homeowners pay between $6,070 and $16,405 for an entire house. Install your inside corner posts at the building’s existing corners, beginning three-quarters of an inch below the starter strip’s bottom. Nail them to the adjoining walls, placing nails at the top of the uppermost nailing slots and continuing down every eight to 12 inches. At Advanced Restorations, we’ve had the opportunity to see many vinyl siding projects during the time we’ve been in business.
Windows and Doors
You will use your steel snips for this cut since they make the most precise cuts in small areas. Check out the video below for more instructions on installing steel siding around light blocks, faucets, and lights. Experience the benefits of expert home siding installation from Universal Windows Direct. Our UniShield® vinyl siding offers exceptional durability and energy efficiency, providing long-lasting protection for your home. Engineered to withstand the elements, our low-maintenance siding for homes resists fading, cracking, and warping, ensuring a beautiful exterior that lasts.
Installing Soffit and Fascia
- Once the old siding is removed, we will inspect for any damage and make repairs as needed.
- But if you do not have that option then leave it banded for a longer period of time.
- At the juncture of the roof and vertical surfaces, flashing and counterflashing shall be provided per the roofing manufacturer’s instruction.
- This can happen if you stack your wood siding or decking overnight on the grass.
- As in the above illustration, at inside corners, siding is frequently butted against a 2 x 2 trim strip.
- Most times when an installation or the product fails, it is due to how it was installed.
If this is not done, it may lead to buckling, warping, or other damage. To ensure proper installation, it is recommended to use a fastening system that allows for movement and to attach the panels to the studs, rather than just the sheathing. Corner boards are a popular and easier alternative to mitered corners. Thickness of the corner board will depend on the thickness of the siding. Corner boards are applied to the sheathing with siding fitting tightly against the narrow edge of the boards, allowing for expansion and an adequate caulking bead.
Imitation brick or stone–asphalt siding
- The best method is to lay 2x4s in periodic spacing about every 3 feet.
- Proper sealing and caulking will not only improve the appearance of your home but also provide a long-lasting, protective barrier against water infiltration.
- Before the replacement siding can be installed, the old siding must be removed.
- We recommend looking for manufacturers that adhere to or exceed American Society for Testing and Materials (ASTM) standards for vinyl siding.
- Slate shingles may be simple in form but many buildings with slate siding are highly decorative.
- You want to holes in your siding to be a quarter-inch in diameter bigger than the screw.
You’ll also need a range of cutting implements like a nail home slot punch, utility knife, and power saw. If you’re working alone, you can achieve consistent results with the help of a siding gauge to space your panels correctly. It’s more affordable than wood, lower maintenance than coated surfaces, and more aesthetically diverse than fiber cement. It might not last as long, but its cost-effective, warp-resistant surface makes its lifespan worthwhile. If you’re looking for a timeless, natural look without the price tag of stone or the maintenance requirements of timber, you’ve met your match.
What are the benefits of siding for my home?
Use of Flashing and Caulking – Flashing should be installed around windows, doors, and other openings to prevent leaks. Caulking should be applied where necessary, but it should not be used as a substitute for proper flashing. Thank you.Not aliens.Something on my scanner.Not native to KS. Thread drift…Vinyl siding,vinyl siding,vinyl siding.Wait ,I don’t really like vinyl siding.The alternative for this house would have been too expensive. One final step in weighing whether to install vinyl siding yourself is to evaluate the pros and cons.
Pink Shirt Roofers™
Composite sidings are available in many styles and can mimic the other siding options. Ants and termites are a threat to many types of wood siding, such that extra treatment and maintenance that can significantly increase the cost in some pest-infested areas. Vinyl siding quotes may vary due to the amount of current exterior that needs removed, underlying damage to current exterior, the quality of the siding panels, and more.
Our Products
If your home does not have a boxed soffit return, but has soffit plywood nailed to the bottoms of the ceiling joists, you may be able to omit the inner channel. In this case, the ends of the soffit lengths can be concealed later by the utility trim of the siding. The angle of the soffit makes the difference here, but when in doubt, it’s best to channel both edges.
Vinyl siding installation guide
On the other hand, many homeowners are perfectly at ease with the change in the home’s appearance given the fact that vinyl siding only needs yearly cleaning and never needs to be painted. Upon completion of the vinyl siding installation, cleaning up debris and appropriately disposing of old siding and materials is important. Utilize a soft cloth or soft-bristled brush and a mixture of soap and water to clean the newly installed siding without causing damage. Addressing expansion and contraction is a crucial aspect of vinyl siding installation. Proper nail placement and utility trim installation will allow for the natural movement of the siding with changes in temperature, reducing the risk of warping or buckling. When attaching siding panels, it’s essential to take into account the potential for expansion and contraction due to changes in temperature and humidity.
Attaching Siding Panels
Start by organizing siding by length and width (if applicable). It is always a good idea idea to wear appropriate work clothes, gloves, masks and eye & ear protection. Cutting wood will of course create sawdust and our Shou Sugi Ban products will shed some soot from cut ends and edges, so plan on getting a little dirty. Learn how to install picture frame a metal wall panel with base trim and C-Metal.
Our family-owned business in La Salle, Colorado proudly makes our patented steel boxed siding panels in America and can ship nationwide, directly to your doorstep. Panels are the same as accessories, and most know, but it’s important to always nail loosely and keep about a thickness of a dime between the head of the fastener and the vinyl itself. We sometimes see the installer hangs the panels correctly, but there must be a gap between the end of the panel and the inside of the pocket of the corner or j-channel. Nails should be driven through the center of the nailing slots, leaving about 1/32 of an inch of space between the nail head and the siding. This allows the vinyl to expand and contract with temperature changes. Vinyl siding comes in various styles to suit architectural designs and personal preferences.
Cutting Techniques with Tin Snips and Utility Knife
Low-quality siding can crack, fade and sag in a much shorter period than a more durable option. To get the beauty and longevity you want out of your siding it’s a good idea to spend a little more upfront and avoid long-term repair costs that will haunt you later. If you are considering replacing your siding, be aware of some common siding installation mistakes that can be detrimental to the results.
Step-by-Step Instructions:
On larger homes, you’ll need more than one piece to cover the surface. While this certainly doesn’t rank as an easy do-it-yourself project, it is possible. You’ll need some handyman skills and many tools to take on this project. But once you have the necessary know-how and equipment, you can take on this task with moderate confidence.
Pry off old panels using a pry bar, starting from the bottom and working upward. Once removed, inspect the wall for damage and repair any problematic areas to create a strong foundation for your new siding. To accommodate expansion and contraction, use nails or fasteners in the center of the nailing slot and avoid driving them too tightly against the siding nailing hem. Ensure that panels and accessories are able to move freely from side to side and leave at least ¼ of an inch of clearance at all openings and stops. Ensuring that your workspace is ready will help the installation go more smoothly.